1. 테스트할 회전 물체의 특정 조건에 따라 고무 조인트와 같은 적절한 커넥터를 선택하십시오.
2. Use the rotary range switch to select the appropriate range (turn the scale value to the same horizontal plane as the dial). If the unknown quantity is measured, the largest range should be selected for rough measurement, and then the range should be determined.
3. Let the test shaft of the tachometer contact the measured shaft, keep a certain pressure and operate synchronously, and keep it on the same centerline.
4. After the pointer of the tachometer is stable, the rotation speed of the measured rotating object can be measured. The speed is equal to the ratio of the upper limit of the range selected by the range switch to the full scale of the reading plate multiplied by the reading of the reading plate.
5. When measuring the linear velocity, a rotary test head should be used.
6. The measured readings are converted according to the following formula: linear velocity (m/min) = (upper limit of the range selected by the range switch/full range of the reading plate) tachometer circumference of the rotating wheel test head.
Pls는 사진 아래에 클릭하고 이 회전 속도계 AR925에 대한 자세한 내용을 읽으십시오.
AR925 Product link:
