+86-18822802390

해결 3 문제 가스 감지기

Nov 27, 2023

해결 3 문제 가스 감지기

 

결함 1. 낮음 농도 가스 할 수 없음 수 감지 됨



1. 확인 여부 공기 펌프 의 가스 감지기 작동 정상적으로. 차단 더 공기 입구 당신의 손가락 동안 5 초. 만약 당신 느낌 명백 흡입 보통, 확인 여부 the 공기 입구 is 차단; if there 아니오 흡입, 확인 여부 the 공기 입구 is 차단;


2. 붓는다 in 질소 to 보정 제로 포인트 또는 보정 제로 포인트 in 깨끗하게 공기, 및 다음 수행 테스트 후 보정;


3. 만약 측정 가스 할 수 없음 감지됨 이후 제로 포인트 보정, 더 가스 감지기 필요 to be 복원 to 공장 설정;


4. 만약 the 가스 할 수 없다 있다 감지됨 후 다음 위 단계, 당신 필요 to 확인 여부 the 가스 to be 측정 exists on site, or the 농도 의 the 가스 to be 측정 is indeed very 낮음. If it is 낮은 than the small 감지 정확도 의 the 가스 센서, 그것 할 수 없다 be 감지됨.


단층 2. 안 더 공기, 저기 있다 아니오 측정 가스, 그러나 값 변동 크게 또는 점프 무작위로.


솔루션:
1. The 단기 제로 포인트 변동 범위 is less than 1% of the large range, which is a normal range. when there is no measured gas, the long-term drift is less than 2% of the large range, which is a normal range. If it exceeds this range, it is necessary to confirm whether there is a measured object on site. The temperature and humidity in gas or air fluctuate 크게, 원인 수치 불안정;


2. 확인 여부 제로 포인트 보정 또는 목표 포인트 보정 작동 있다 수행된 수행된 켜기 더 가스 검출기. 만약 더 제로 포인트 보정 작동 is 수행됨 어디에 있는 a 가스 to be 측정, 낮음 농도 가스 가능 아니 be 감지됨. 만약 만약 제로 포인트 보정 작동 수행됨 어디에 있는 있는 a 가스 to be 측정됨. The target point has been calibrated, but the calibrated concentration value does not match the actual concentration value, which may cause the gas detector value to fluctuate greatly or the detected value to be too small. Both of these situation can be solved by restoring to factory settings;


3. 만약 the 문제 여전히 할 수 없다 be solved, 당신 필요 to 확인 여부 the 가스 detector is 공급된 with 고농도 가스 또는 여부 고농도 가스 충격 the 가스 센서. 만약 there is 충격 on the 가스 센서, 회전 켜기 the 가스 detector and run it 24 시간 동안. 만약 the 값 is still 불안정, the 가스 센서 may be 손상된 의해 충격 및 the 가스 센서 필요 to be 교체.


결함 3. 부정확 탐지


솔루션:
1. 확인 여부 가스 농도 온 사이트 정확하다. 차이 사이 이론 값 및 그 실제 값 이다 매우 크다. 보정 그만큼 가스 검출기 바이 통과 인 표준 가스 to 보장 감지 정확도, 또는 보내기 그것 to a 제3자 측정 에이전시 for verification and calibration;


2. 만약 그 가스 센서 있다 있었다 사용 for a long 시간, the 측정 값 may have 오류. 당신 필요 to 확인 with the 제조업체 여부 the 가스 센서 can still be used. 만약 the sensor itself is 접근 the end of its 서비스 수명, it may still be 정상 짝수 후 재교정 for a 짧은 기간 of 시간. 그러나, the 측정 값 의 the 가스 검출기 의지 드리프트 및 감지 부정확합니다. It is 권장 to 교체 가스 센서.

 

5 Flammable gas detector

문의 보내기