무엇 원리 혼합 가스 검출기 % 3f
고정 혼합 가스 검출기 is mainly divided into two parts: fixed probe and alarm control host, which form a mixed gas detector system;
그만큼 프로브 감지 그 값 의 가스 누출 농도 안 그 장소, 그리고 그 호스트 인 그 모니터링 방 그래서 저것 그 안전 보호 인원 할 수 있다 볼 수 있다 그 값 at any time and take time 적시 안전 보호 조치.
표준 혼합 가스 검출기
그만큼 표준 for 사용 혼합 가스 검출기 are very simple. Didn't the above say that there are two types?
사용 의 휴대용 혼합 가스 검출기 is very simple. Just turn it on, and then warm it up for 100s, and then hold it directly to detect it in the place. If it is a pump suction type, it will be used in underground mines, mines, pipeline construction and other places;
그냥 풋 the 펌핑 튜브 in it, the 펌핑 윌 자동으로 빨기 위로 the gas in the detection place, and then carry out the detection;
만약 the gas to be measured exceeds the standard, an alarm will be issued and an early warning will be issued, and then construction personnel will be reminded to take safety protection measures.
고정 혼합 가스 감지기 더 쉽게 to use, as long as the installation and power-on test are normal;
그것은 will continuously detect the gas to be measured in the place 24 hours a day, the efficiency is very fast, and the detection is very accurate, without any manual operation.
Working principle of mixed gas detector
If the value exceeds the lower limit of the alarm, that is, after the unit value of 25 percent or 50 percent , an alarm will be issued to remind relevant security personnel to take protective measures;
For example, turn on the exhaust fan, cut off the source of gas leakage, start the sprinkler system and other equipment;
희석 초과 가스 to 감소 to a 안전 범위 또는 제거 it 완전히.
