원칙
타코미터는 수신된 디지털 펄스 신호(센서에서 보낸)를 처리 후 cpu의 카운팅 포트로 직접 읽고 소프트웨어를 통해 포인터의 해당 위치와 속도를 계산한 다음 cpu의 제어 포트를 통해, 증폭 후 스테핑 모터를 구동하십시오. 해당 속도 값을 나타내는 양의 방향과 음의 방향으로 회전하십시오 (포인터는 스테퍼 모터의 회전 샤프트에 직접 장착됨). 스테퍼 모터는 1/3 단계 만 걸립니다.
use
is often used in the manufacturing of motors, electric fans, paper, plastics, chemical fibers, washing machines, automobiles, airplanes, ships, etc. Most commonly used is a handheld centrifugal tachometer. Tachometer measurement is indispensable in all areas of the national economy.
Pls는 사진 아래에 클릭하고 이 디지털 타코미터 AR925에 대한 자세한 내용을 읽으십시오.
AR925 Product link:
